Anaerobic mono-manure digestion for combined heat and power (CHP) production – large-scale

Auteur(s): Uslu, A.
Gerelateerde onderwerpen:
Downloads

Download Icon MonoManure digestion to produce E&H_large scale_2019 (Laatst aangepast op: 2019-09-13 20:17:44)

The process involves a manure storage, mixing tank, digesters, hygienisation/pasteurisation tank and digestate and waste water treatment. The biogas is desulfurized prior to it being fed into a gas motor to produce heat & electricity. The Activities Decree on emissions for combustion plants requires that the gas motors comply with the emission limits for SO2 and NOx.

Manure input is assumed to consist of a mixture of pig manure and cattle manure, with a mix of slurry and thick fractions in a ratio of 80/20. This means that the average biogas is slightly below 30 m3 biogas per tonne manure.

In the digester, anaerobic micro-organisms break down manure into intermediate substrates and methanogens turn them into biogas. Biogas is a blend of methane (50–75% CH4) and carbon dioxide (25-50% CO2) with some trace amounts of ammonia (NH3), hydrogen sulphide (H2S), and water.
Digestate is often separated into a thick and thin fraction. The thick fraction can then be hygienized to make it safe for use or export as a fertilizer. The hygienisation prior to export is mandatory. During hygienisation, the digestate is kept at a temperature of at least 70°C for one hour. The thin aqueous fraction can be further purified to a concentrated fraction and water.

Feedback

Website by Webroots